The Teal Hooded Waterproof Shell Jacket is a made-to-order jacket built for labels and wholesale programmes across the USA, the UK, Germany, Canada and Australia. As a jacket manufacturer and exporter in Bangladesh, we make this style from deep teal waterproof coated shell with a fine tight weave with an adjustable hood and two chest zip pockets and a finish that holds its shape wear after wear. Buyers in Brazil and Chile also order this style for seasonal ranges and retail programmes.
It sits in our wider outerwear range beside the Fleece Jacket, Softshell Jacket, Track Jacket and Windbreaker Jacket. The full set of custom styles is listed on our products page, and each style is made to order with your labels, colours and branding.
Key points for this style:
- The hood adjusts with cord toggles at both sides, so it pulls in close in wind and rain.
- Both chest pockets zip closed and sit high, where they stay clear of a pack waist belt.
- Cuff straps fasten with hook and loop, sealing the sleeve over gloves.
- Full size range graded from your own size chart or tech pack.
- Made to order in Bangladesh with your private label, hang tags and packing.
Teal Hooded Waterproof Shell Jacket: Design and Construction Detail
The hood is cut in panels so it holds its shape, with cord toggles at the front edges and a small peak. The front zip runs straight under a neat placket line, and the two chest pockets slant for easy reach, with zipped and sealed openings.
The back panel is plain, shaped with side seams so the shell does not balloon in wind. The hem carries a drawcord, and the cuff straps adjust over gloves or bare wrists.
Teal Hooded Waterproof Shell Jacket: Fabric, Fit and Comfort
The shell is a fine, tight weave with a waterproof coating on the inside face, so rain beads on the surface instead of soaking the cloth. Sealed seam work keeps the joins from leaking at the shoulders and hood.
The fit is a regular outdoor block with room for a fleece beneath. Outdoor and workwear buyers in Brazil and Chile order this style for wet season staff kits and field teams.
Deep teal earns its place in an outdoor range because it does the work of a dark shell while looking fresher in photographs and on the rail, which matters for retail and rental programmes alike. The panel cut hood is the detail buyers comment on most: it turns with the head instead of pulling the collar round, because the hood is shaped in sections rather than cut as one flat piece. The chest pockets are placed to clear a rucksack belt, and their zips run under sealed garages so driven rain cannot sit in the teeth. Inside, the coating is checked for even coverage, since a thin patch is where a shell starts to wet out after a season of use. The cuff straps are cut long enough to close over a glove cuff and short enough not to flap when open. Buyers running staff kits often ask for the same shell in a second colour for supervisors, and the pattern, labels and packing carry over so the two colours read as one uniform. Every production run is spray tested on a sample from the bulk cloth before cutting is approved.
Specifications
| Item | Teal Hooded Waterproof Shell Jacket |
| Category | Workwear & Outerwear |
| Fabric | Waterproof coated polyester shell, deep teal |
| Design | Hooded waterproof shell jacket with two chest zip pockets |
| Pockets | Two slanted chest zip pockets with sealed openings |
| Sizes | XS to 3XL, graded to your size chart |
| Colours | Deep teal as shown, with other shell colours on request |
| Branding | Print, embroidery, applique, private label, hang tags |
| Minimum order | Our standard minimum of 1,200 pieces per style in up to two colours |
| Made in | Bangladesh |
Read More About This Teal Hooded Waterproof Shell Jacket
Read More
Pattern Making and Size Grading
Every Teal Hooded Waterproof Shell Jacket order starts from your approved pattern or tech pack. Our pattern team grades the block across the full size range, checking the collar or hood fit, the shoulder line and the an adjustable hood and two chest zip pockets balance on each size, not only the sample size. A pre-production sample in the real deep teal waterproof coated shell with a fine tight weave is measured against the size chart before bulk cutting begins.
Private Label and OEM Production
Private label production covers your own neck labels, care labels, hang tags and packaging. The Teal Hooded Waterproof Shell Jacket can carry your brand throughout, with label artwork approved on a sample before the bulk run. OEM buyers can also adjust the an adjustable hood and two chest zip pockets, the collar or hood shape and the zip or button choice to match their house pattern.
Bulk Production and Quality Control
Bulk cutting and sewing run under in-line and end-line inspection. Each Teal Hooded Waterproof Shell Jacket is checked for zip or button alignment, collar and hood symmetry, stitch density and shade consistency within the bundle. Faulty items are pulled at the table, and a final audit checks measurements, cleanliness and packing before cartons are sealed.
Fabric and GSM Options
The standard build uses deep teal waterproof coated shell with a fine tight weave, and buyers can set the construction to suit the season: unlined and light for summer ranges, fleece backed or lined builds for winter, and heavier shell cloth where the jacket works outdoors. Send your target hand feel and weather use, and we match the fabric and lining to it before sampling.
Print, Embroidery and Branding Methods
The clean shell front stays ready for screen print, embroidery, applique and heat transfer work. Chest logos, sleeve artwork and back panels can be combined on one style, and every branding method is sampled on the real garment first so placement and size are approved before bulk. Private labels and woven hem tags finish the branded build.
Packing, Dispatch and Lead Times
Each Teal Hooded Waterproof Shell Jacket is folded and polybagged as standard, with ratio or solid packing to your instruction. Cartons are marked with style, colour and size breakdown for easy warehouse intake in Brazil and Chile. Dispatch runs by sea or air from Chattogram port, and lead time is confirmed in writing against your approved sample and order quantity.
Pricing and How to Get an Exact Quote
Pricing depends on the fabric, the an adjustable hood and two chest zip pockets construction and the branding you choose, so an exact quote needs your tech pack or a clear reference sample. Send the artwork, size range and colour list and we return a full cost breakdown with sampling and bulk prices. There are no hidden extras: the quoted price covers making, branding and standard packing.
Why Buyers Choose Siatex Bangladesh
Buyers choose Siatex Bangladesh for straight answers and careful making. One team follows your order from pattern to carton, samples are honest, measurements are checked and reported, and shade and quality stay consistent from the first carton to the last. That is why repeat orders from the USA, UK, Germany, Canada and Australia sit at the centre of our jacket production.
Frequently Asked Questions
Are the seams sealed on this shell jacket?
Yes. The main joins at the shoulders, hood and zips are sealed so water cannot creep through the needle holes, which is where unlined shells usually fail first. The sealing is checked panel by panel before dispatch.
Can a logo be embroidered on a coated shell?
It can, but needle holes can let water in at that spot, so for waterproof builds we usually recommend heat transfer branding, which keeps the coating whole. Both methods are sampled on the teal cloth so you can compare.
Can this shell be made with a mesh lining?
Yes. A light mesh lining can be added on the same block, which lifts the coating off the skin and helps the jacket feel drier in humid weather. The hood and pockets stay the same.
Why are the pockets on the chest and not at the waist?
High pockets stay reachable when a pack waist belt or a harness is worn over the jacket, and they keep contents clear of splashes at hem level. Waist pockets can be added on the same block if your programme prefers them.