The Royal Blue Hooded Windbreaker Jacket is a made-to-order jacket built for labels and wholesale programmes across the USA, the UK, Germany, Canada and Australia. As a jacket manufacturer and exporter in Bangladesh, we make this style from bright royal blue lightweight ripstop shell with a smooth water resistant finish with an attached hood and a drawcord hem and a finish that holds its shape wear after wear. Buyers in France and the Netherlands also order this style for seasonal ranges and retail programmes.
It sits in our wider outerwear range beside the Fleece Jacket, Softshell Jacket, Track Jacket and Windbreaker Jacket. The full set of custom styles is listed on our products page, and each style is made to order with your labels, colours and branding.
Key points for this style:
- The ripstop weave stops small tears from spreading, which suits a light shell that gets packed and carried often.
- Both side pockets zip closed, so keys and phones stay safe on the move.
- The hem drawcord has two toggles, so the fit can be pulled in against the wind.
- Full size range graded from your own size chart or tech pack.
- Made to order in Bangladesh with your private label, hang tags and packing.
Royal Blue Hooded Windbreaker Jacket: Design and Construction Detail
The hood is attached and shaped with a small peak, bound with elastic so it sits close without a cord at the front. The front zip runs straight from hem to chin, and the two side pockets are set into the side seams with neat zip openings.
Elastic cuffs keep the sleeves in place, and the back panel is plain with a centre seam that lets the light shell fall cleanly. The hem drawcord adjusts with two toggles, one at each side.
Royal Blue Hooded Windbreaker Jacket: Fabric, Fit and Comfort
Ripstop is a plain weave with a fine grid of stronger yarns, which is why the cloth stays light yet resists tearing. The smooth face takes a water resistant finish that sheds showers rather than soaking through at the first rain.
The fit is a regular team block with room to layer over a tee or a light fleece. Event and outdoor buyers in France and the Netherlands run this style for staff kits, race days and festival crews.
Royal blue is chosen for team and event work because it reads clearly at a distance and photographs well, which is why this shell is a repeat style for staff kits. The light ripstop means the jacket folds small into a kit bag, and the smooth face wipes clean after outdoor use. Buyers usually pair it with a fleece from the same programme for cold mornings, and the two layers share labels and packing so the kit reads as one range. The hood shape is checked on every size at sampling, because a hood that sits well in medium can pull in the largest size if the grading is lazy. Zips are run up and down on every jacket at final inspection, and the pocket zips are checked with the garment laid flat so a twisted tape cannot hide. The drawcord toggles are bar tacked at the cord ends so they cannot slide off in the wash. Shade is checked bundle by bundle under daylight lamps, since bright blues show banding between cloth lots more clearly than dark shades. The result is a simple shell that does its one job properly: light cover, fast on, and clearly branded when the buyer adds a print.
Specifications
| Item | Royal Blue Hooded Windbreaker Jacket |
| Category | Workwear & Outerwear |
| Fabric | Lightweight ripstop polyester shell, royal blue |
| Design | Hooded windbreaker with full zip, two zip pockets and drawcord hem |
| Hood | Attached hood with a shaped peak and elastic binding |
| Sizes | XS to 3XL, graded to your size chart |
| Colours | Royal blue as shown, with other shell colours on request |
| Branding | Print, embroidery, applique, private label, hang tags |
| Minimum order | Our standard minimum of 1,200 pieces per style in up to two colours |
| Made in | Bangladesh |
Read More About This Royal Blue Hooded Windbreaker Jacket
Read More
Pattern Making and Size Grading
Every Royal Blue Hooded Windbreaker Jacket order starts from your approved pattern or tech pack. Our pattern team grades the block across the full size range, checking the collar or hood fit, the shoulder line and the an attached hood and a drawcord hem balance on each size, not only the sample size. A pre-production sample in the real bright royal blue lightweight ripstop shell with a smooth water resistant finish is measured against the size chart before bulk cutting begins.
Private Label and OEM Production
Private label production covers your own neck labels, care labels, hang tags and packaging. The Royal Blue Hooded Windbreaker Jacket can carry your brand throughout, with label artwork approved on a sample before the bulk run. OEM buyers can also adjust the an attached hood and a drawcord hem, the collar or hood shape and the zip or button choice to match their house pattern.
Bulk Production and Quality Control
Bulk cutting and sewing run under in-line and end-line inspection. Each Royal Blue Hooded Windbreaker Jacket is checked for zip or button alignment, collar and hood symmetry, stitch density and shade consistency within the bundle. Faulty items are pulled at the table, and a final audit checks measurements, cleanliness and packing before cartons are sealed.
Fabric and GSM Options
The standard build uses bright royal blue lightweight ripstop shell with a smooth water resistant finish, and buyers can set the construction to suit the season: unlined and light for summer ranges, fleece backed or lined builds for winter, and heavier shell cloth where the jacket works outdoors. Send your target hand feel and weather use, and we match the fabric and lining to it before sampling.
Print, Embroidery and Branding Methods
The plain zip front stays ready for screen print, embroidery, applique and heat transfer work. Chest logos, sleeve artwork and back panels can be combined on one style, and every branding method is sampled on the real garment first so placement and size are approved before bulk. Private labels and woven hem tags finish the branded build.
Packing, Dispatch and Lead Times
Each Royal Blue Hooded Windbreaker Jacket is folded and polybagged as standard, with ratio or solid packing to your instruction. Cartons are marked with style, colour and size breakdown for easy warehouse intake in France and the Netherlands. Dispatch runs by sea or air from Chattogram port, and lead time is confirmed in writing against your approved sample and order quantity.
Pricing and How to Get an Exact Quote
Pricing depends on the fabric, the an attached hood and a drawcord hem construction and the branding you choose, so an exact quote needs your tech pack or a clear reference sample. Send the artwork, size range and colour list and we return a full cost breakdown with sampling and bulk prices. There are no hidden extras: the quoted price covers making, branding and standard packing.
Why Buyers Choose Siatex Bangladesh
Buyers choose Siatex Bangladesh for straight answers and careful making. One team follows your order from pattern to carton, samples are honest, measurements are checked and reported, and shade and quality stay consistent from the first carton to the last. That is why repeat orders from the USA, UK, Germany, Canada and Australia sit at the centre of our jacket production.
Frequently Asked Questions
Is the hood on this windbreaker attached or removable?
It is attached and shaped to lie flat on the shoulders when it is down, with elastic binding that keeps it close when it is up. If your programme needs a hood that packs into the collar instead, the same block can be built that way.
How much rain can the ripstop shell handle?
The finish is water resistant, so it sheds showers and light rain and dries fast. For steady heavy rain, choose a taped seam waterproof build; this windbreaker is made for light, packable weather cover.
Can our event logo be printed on the chest and back?
Yes. The smooth shell takes screen print and heat transfer cleanly, and a chest and back combination is the usual event layout. Every print is sampled on the real royal blue cloth first so the colours are approved before bulk.
Does the drawcord hem change the fit much?
It lets the wearer pull the hem in against the wind or wear it loose, and the two toggles hold the setting. The graded body fit stays the same across the size range with or without the cord pulled.