Our Red Shoulder Stripe Team Kit is made to order in Bangladesh for sports clubs, schools, academies, leagues and private label teamwear labels in the USA, the UK, Germany, Canada and Australia, and for growing programmes in France and Belgium. As a clothing manufacturer, supplier, wholesaler and exporter working from Bangladesh, we build this style to your size chart, your label and your packing spec, with a white pinstripe trim across the shoulders of the jersey and plain panels ready for your numbers and crest.
A team kit is judged on the match between its two pieces, so this set is patterned on a proven teamwear block, sampled in the real mesh and checked against the size chart and the shade standard before a single bulk panel is cut. Jersey and shorts are cut from the same cloth length, finished by hand and checked set by set before they are folded together.
Buyers usually look at this style alongside the royal blue team kit, green team kit and the royal blue team sports jersey. The full range sits on our products page.
- White pinstripe trim across both shoulders of the jersey.
- Matching red shorts with an elasticated drawstring waist.
- Fine mesh knit, shade banded so jersey and shorts always match.
Red Shoulder Stripe Team Kit: Design and Construction Detail
The red team kit pairs a crew neck short sleeve jersey with matching shorts in the same red mesh. The jersey carries its identity at the shoulders: fine white pinstripes run across the top of each sleeve and shoulder seam, set against the plain red body so the chest and back stay clear for a crest, a sponsor mark and a number. The shorts follow in the same cloth with an elasticated waist and an inside drawstring.
Shoulder stripes show every setting fault, so the stripe panel is cut and sewn as part of the shoulder seam rather than applied afterwards, and both shoulders are measured against each other before the sleeves are closed. The crew neck band is set evenly all round, the side seams run straight from armhole to hem, and jersey and shorts are shade checked together before a kit is made up.
Red Shoulder Stripe Team Kit: Fabric, Fit and Comfort
The cloth is a fine mesh knit with an even eyelet texture across both pieces, light on the body and soft against the skin with the mesh holes small and regular. The red is dyed to a standard held on file, and because jersey and shorts are cut from the same length, a full squad order reads as one red from the first shirt to the last.
The fit is a regular team cut with room through the chest and seat, graded across the adult run on one block so the shoulder stripe sits at the same height at every size. Buyers running this red kit beside the royal blue and green colourways of the same block share one size chart and one fit approval across the whole set of colours.
A striped shoulder is how a club kit gets its identity without giving up a plain body for printing, and buyers in France and Belgium run this red build as their home kit for exactly that reason. The stripe pattern, the shade standard and the size chart are held together on one file, so the kit a player wears this season is the kit he reorders next season. The mesh keeps its even texture wash after wash, the shoulder stripes are measured on every shirt, and jersey and shorts are shade matched before each kit is made up and folded.
| Category | Activewear |
| Fabric | Polyester mesh knit with a fine eyelet texture |
| Design | Crew neck short sleeve jersey with white shoulder pinstripes, matching drawstring shorts |
| Sizes | XS to 3XL (adults), graded to your size chart |
| Colours | True red with white shoulder stripes, and the full team shade card behind it |
| Numbers and names | Plain chest and back panels ready for your crest, numbers and player names |
| Branding | Your label, tags and print or embroidery |
| Minimum order | our standard minimum of 1,200 pieces per style in up to two colours |
| Packing | Folded, one piece per polybag, export carton |
| Lead time | Confirmed at order stage, held with weekly updates |
Red Shoulder Stripe Team Kit: Read More
Pattern Making and Size Grading
A good Red Shoulder Stripe Team Kit starts with the pattern and the set match. The jersey block is drafted to your size chart with the chest, neck and sleeve set first, the shorts block follows with the waist and leg, and both are graded across the full size run so the kit stays in proportion at every size. A pre-production sample is sewn first and checked flat, worn and measured, and small corrections are made before the bulk markers are laid.
Private Label and OEM Production
Private label and club identity are where this Red Shoulder Stripe Team Kit becomes unmistakably yours. The woven main label sits at the back neck, size and care labels follow your market rules, and your crest, sponsor artwork, player names and numbers are printed to your artwork file. Neck style, trim layout and short length can all be set to your house pattern at the sampling stage, so bulk matches the approved sample exactly.
Bulk Production and Quality Control
Bulk production runs on a shade banded cutting spread, so the jersey and shorts of one kit always come from the same cloth length and the two pieces match exactly in shade. Each bundle passes through inline checks at the neck, the side seams and the waistband, kits are made up and counted set by set, and a final audit sample is measured against the size chart before cartons are sealed. Faulty kits are pulled at the line, never packed and hoped for.
Fabric and GSM Options
The cloth story matters as much as the cut. This style uses fine mesh knit, and the same pattern can be sewn in a smooth interlock or a textured pique when your range needs a step across the season. Buyers in France and Belgium often take one block in a home and an away colourway, sharing a single size chart and fit approval across the whole order.
Print, Embroidery and Branding Methods
The red team kit takes branding the teamwear way: your crest printed or embroidered on the chest, a plain player number on the back, names above the number where your league plays with names, and your woven label at the neck. Every branding element is sampled on the real garment first so placement and size are approved before bulk, and your labels and tags finish the build.
Packing, Dispatch and Lead Times
Finished kits are pressed, folded together as one set and polybagged one kit per bag unless your spec says otherwise, and squad size ratios can be packed against your list, position by position if you send the breakdown. Cartons are marked by size and colour with a packing list inside. Lead times are confirmed at order stage and held with weekly production updates until the goods leave Bangladesh.
Pricing and How to Get an Exact Quote
An exact quote needs four things: the fabric and weight, the print work including numbers and names, the size ratio, and the delivery point. With those fixed, pricing is firm and itemised, covering cloth, trims, packing and finishing. Two builds of the same team kit can price quite differently, so we always quote the build you approved, not a generic rate.
Why Buyers Choose Siatex Bangladesh
Buyers choose Siatex because the same factory team handles sampling, bulk and finishing under one roof in Bangladesh, and because the Red Shoulder Stripe Team Kit they approve is the one that arrives. Programmes running into the USA, the UK, Germany, Canada and Australia are reordered season after season on that simple basis: honest fabric weights, measured samples and cartons that match the packing list.
Frequently Asked Questions
Are the white shoulder stripes printed or sewn into the red jersey?
The pinstripes are part of the shoulder make: the striped panel is cut and sewn into the shoulder and sleeve seam, so the stripes sit flat, line up at the seam and stay in place wash after wash.
Can the red team kit carry our club crest and player numbers?
Yes. The chest and back panels are left plain for your crest, sponsor artwork, player names and numbers, printed to your artwork file. Placement and size are approved on a sample kit before bulk production starts.
Do the jersey and shorts of the red kit match exactly?
Yes. Both pieces are cut from the same cloth length on a shade banded spread and checked together before the kit is made up, so the shorts are the same red as the jersey in every size.
Can this team kit be made in our own club colours?
Yes. The block, stripe layout and size chart are held on file, so the same kit can be cut in your club colours once lab dips are approved at the sampling stage, with the shoulder trim set to your colour plan.