Our Grey Marle Woven Label Cuff Beanie is made to order in Bangladesh for headwear brands, promotional merchandise buyers, uniform suppliers and private label accessory labels in the USA, the UK, Germany, Canada and Australia, and for growing programmes in France and Netherlands. As a clothing manufacturer, supplier, wholesaler and exporter working from Bangladesh, we build this style to your spec sheet, your label and your packing spec, with a fine rib knit in light grey marle yarn, a wide folded cuff and a small woven label patch with a stitched diamond outline sewn on the cuff.
A beanie is judged on its knit, its cuff and its crown, so this style is knitted on a proven block, checked against the spec sheet and the shade standard, and finished by hand before a single bulk piece is folded. Every piece is linked off, pressed lightly and checked one by one before packing.
Buyers usually look at this style alongside the charcoal chunky rib cuff beanie, cream chunky rib cuff beanie and the beanie. The full range sits on our products page.
- Fine rib knit body in a light grey marle yarn.
- Wide folded cuff that sits flat and holds its fold.
- Woven label patch with a stitched diamond on the cuff.
Grey Marle Woven Label Cuff Beanie: Design and Construction Detail
The beanie is knitted in a fine rib from a light grey marle yarn, the two grey tones twisted together in the yarn so the face carries a soft, heathered depth rather than one flat colour. The body rises to a shaped crown with the shaping worked evenly round the top, and at the bottom a wide cuff folds up once and sits flat against the body, the rib running unbroken from the cuff into the crown.
On the front of the cuff sits a small woven label patch in a matching light grey, sewn down on all four sides with a neat stitched diamond outline at its centre and no lettering, so the branding reads as a quiet mark at a glance. The patch is stitched through the cuff only, the fold line is set so the label lands in the same place on every piece, and the crown shaping is checked round the full circle before a piece leaves the linking table.
Grey Marle Woven Label Cuff Beanie: Yarn, Knit and Fit
The knit is a fine, even rib with close stitches and clean fibres, the kind of surface that shows its quality the moment it is picked up. The marle yarn hides the small shade drift that plain grey shows at once, and the rib gives the beanie its stretch and recovery, so one size sits well across adult head sizes and the cuff comes back to its fold after wear.
The size story is simple: one adult size, the fit carried by the rib knit and the cuff depth rather than by a size run. Cuff depth, crown length and label position are all set on the spec sheet, and buyers running this grey marle build beside a plainer colourway of the same block share one spec sheet and one fit approval across both.
A grey marle beanie with a woven label earns its place in a programme by being the quiet branded piece a range can carry all winter, the heathered grey sitting beside every colour in the story and the small diamond label giving it a mark buyers remember, and buyers in France and the Netherlands run this build as their standing label beanie for exactly that reason. The shade standard, the label artwork and the spec sheet are held together on one file, so the beanie a buyer orders this season is the beanie it orders next season. The cuff fold is set at one depth, the label lands in the same place on every piece, and every beanie is checked against the size chart before it is folded into the pack.
| Category | Accessories |
| Fabric | Fine rib knit in light grey marle yarn |
| Design | Fine rib knit beanie with a wide folded cuff and a woven label patch on the cuff |
| Sizes | One size (adults), stretch rib knit fit |
| Colours | Light grey marle, full shade card behind it |
| Label | Small woven label patch sewn on the cuff with a stitched diamond outline |
| Branding | Your woven label, embroidered mark, tags and branded packing |
| Minimum order | our standard minimum of 1,200 pieces per style in up to two colours |
| Packing | Folded flat, one piece per polybag, export carton |
| Lead time | Confirmed at order stage, held with weekly updates |
Grey Marle Woven Label Cuff Beanie: Read More
Pattern Making and Size Grading
A good Grey Marle Woven Label Cuff Beanie starts with the block and the gauge. The crown depth and the shaping are set first, the cuff depth is worked out against the body so the fold sits where it should, and the rib pattern is set out on the spec sheet before a yarn is chosen. A pre-production sample is knitted first, checked flat and measured, and small corrections are made before the bulk programme is set.
Private Label and OEM Production
Private label is where this Grey Marle Woven Label Cuff Beanie becomes unmistakably yours. The woven main label can sit on the cuff or inside the crown, size and care labels follow your market rules, and swing tags, stickers and polybag print carry your artwork. Cuff depth, rib pattern and crown length can all be set to your house pattern at the sampling stage, so bulk matches the approved sample exactly.
Bulk Production and Quality Control
Bulk production runs on shade banded yarn lots, so every piece in one carton comes off the same dye lot. Each batch passes through inline checks at the cuff rib, the crown shaping and the linking, pieces are checked for shade at the finishing table, and a final audit sample is measured against the spec sheet before cartons are sealed. Faulty pieces are pulled at the table, never packed and hoped for.
Fabric and GSM Options
The yarn story matters as much as the block. This style uses fine rib knit in light grey marle yarn, and the same block can be knitted in a finer or a chunkier gauge when your range needs a step across the season. Buyers in France and Netherlands often take one block in two colourways as a core and a seasonal story, sharing a single spec sheet and size approval across the whole order.
Print, Embroidery and Branding Methods
The woven label patch on the cuff takes branding the headwear way: a woven label worked to your artwork, an embroidered mark on the cuff where your design leaves room, and your artwork on the swing tag and polybag. Every branding element is sampled on a real piece first so placement and size are approved before bulk, and your labels and tags finish the private label build.
Packing, Dispatch and Lead Times
Finished pieces are folded flat and polybagged one piece per bag unless your spec says otherwise, and mixed colour ratios can be packed against your list. Cartons are marked by colour and style with a packing list inside. Lead times are confirmed at order stage and held with weekly production updates until the goods leave Bangladesh.
Pricing and How to Get an Exact Quote
An exact quote needs four things: the yarn and the gauge, the size run, the label and colour work, and the delivery point. With those fixed, pricing is firm and itemised, covering yarn, knitting, linking, finishing and packing. Two builds of the same beanie style can price quite differently, so we always quote the build you approved, not a generic rate.
Why Buyers Choose Siatex Bangladesh
Buyers choose Siatex because the same factory team handles sampling, bulk and finishing under one roof in Bangladesh, and because the Grey Marle Woven Label Cuff Beanie they approve is the one that arrives. Programmes running into the USA, the UK, Germany, Canada and Australia are reordered season after season on that simple basis: honest yarn specs, measured samples and cartons that match the packing list.
Frequently Asked Questions
What does the woven label on the grey marle beanie show?
The patch is a small light grey woven label sewn on the front of the cuff, finished with a stitched diamond outline and no lettering. Your own artwork can replace the diamond at the sampling stage, and the patch size and position are set on the spec sheet.
Is the grey marle beanie one size?
Yes. It is knitted in one adult size and the fine rib gives the stretch, so the beanie and its folded cuff sit well across adult head sizes. Crown length and cuff depth are set on the spec sheet and can be adjusted at sampling.
How is the marle shade kept level across a whole order?
The yarn is bought in one dye lot for the order and every batch is checked against the held marle standard before knitting starts. The standard stays on file, so a repeat order lands on the same heathered grey.
Can our own label design go on the cuff of this beanie?
Yes. The woven patch is your branding space: your mark, your colours and your label layout, sampled on the real cuff for your approval before bulk. Your swing tags and packing finish the build.