Grey Diagonal Stripe Print T-Shirt Manufacturer in Bangladesh
A diagonal print has nowhere to hide. The stripes run corner to corner across the front, so a placement that drifts by a few millimetres reads instantly as a mistake, and a stripe that crosses a seam at the wrong angle breaks the whole design. This shirt is built on a cotton-polyester blend ground that holds its dimensions, and as a t-shirt wholesaler in Bangladesh we set the stripe angle and position on the approved sample and hold it across every size in the run.
We supply sportswear labels, uniform buyers and fashion brands across the USA, UK, Germany, Canada and Australia. If your programme already runs our red chevron print t-shirt, this grey diagonal works as its calmer partner in the same graphic family, and both sit beside our screen printed crew neck t-shirt for buyers building a wider print story.
The blend earns its place on a printed style. Cotton gives the soft hand buyers expect, while the polyester share steadies the panel so the printed angle measured at sampling is the angle that reaches the customer, with no twist creeping in after washing.
- Men’s crew neck t-shirt in mid grey cotton-polyester jersey
- Two diagonal stripes in cyan and royal blue across the front
- Stripe angle and position set on the sample and held per size
- Your woven label, hang tag and packing on every shirt
A Stripe Edge That Runs Dead Straight
The close view follows the edge where the cyan stripe meets the grey ground. The line is straight and clean for its whole run, with no wobble where the screen lifted and no colour bleeding into the knit. On a diagonal design that edge is the quality signal a buyer reads first, so it is checked on the first shirts off every table.
- Stripe edges straight, with no bleed into the ground
- Registration checked on the first shirts of each run
- Print film thin enough to flex across the diagonal
A Blend Knit That Holds Its Shape
In the close view the grey knit runs in even, smooth loops, with the blended yarn giving a cleaner face than pure cotton at the same weight. That smooth face is what takes a sharp stripe edge, and the blend’s stability keeps the front panel square so the printed angle stays honest through cutting, sewing and washing.
- Smooth blended face for a sharp print edge
- Stable panel that resists twist after washing
- One dye lot for a mixed-size order, so sizes match on a rail
A Graphic That Scales With the Body
The body itself is a regular straight cut with side seams, short sleeves and a ribbed crew collar, and the two stripes are placed from fixed points on the pattern rather than eyeballed at the print table. As the body grades up, the stripe spacing opens in proportion, so the design reads the same on an XS and a 3XL.
- Regular straight body with side seams for a stable hang
- Stripe placement fixed from pattern points, not by eye
- Proportions graded consistently from XS to 3XL
Product Details
| Item | Grey Diagonal Stripe Print T-Shirt |
| Category | T-Shirts |
| Fabric | Cotton-polyester single jersey, smooth print face |
| Neckline | Crew neck with ribbed band |
| Sleeves | Short sleeves, double-needle hems |
| Sizes | XS to 3XL, graded to your size chart |
| Colours | Mid grey as shown, further grounds matched on lab dips |
| Branding | Private label, hang tag, print, embroidery, packing |
| Minimum order | Our standard minimum of 1,200 pieces per style in up to two colours |
| Made in | Bangladesh |
Read More
Pattern Making and Size Grading
The pattern starts from your measurement chart or a reference garment, and the stripe positions are drawn onto the pattern itself, not left to the print floor. That means grading carries the design with it: each size is cut from a block where the stripe angle, spacing and start point are already fixed, and a printed sample in the real blend proves the geometry before bulk cutting.
- Patterns made from your chart, your sample or our standard tee block
- Stripe positions drawn on the pattern and graded with it
- Printed sample approved before the bulk is cut
Private Label and OEM Production
Nothing on the finished shirt points back to us. Your label is sewn at the back neck, your hang tag carries your name, and small embroidery can be added on the chest or sleeve where it clears the stripes. We work as the quiet factory partner behind your label.
- Woven or printed main label, plus size and care labels in your layout
- Embroidery placed to your artwork where the design allows
- Hang tags, barcode stickers and retail packing supplied to your format
Bulk Production and Quality Control
Production follows the approved sample step by step. Cut panels are checked for squareness before printing, because a skewed panel turns a straight stripe crooked no matter how well it is printed. Finished shirts are measured, the stripe angle is spot-checked against the standard, and stitching and pressing are cleared before packing.
- Panel squareness checked before the print table
- Stripe angle spot-checked against the approved standard
- Final check of measurements, stitching and pressing before packing
Packaging for Retail and Online Sales
Shirts are folded with the collar and the top stripe showing on the top face of the fold, which keeps the graphic visible in a bag or a stock photograph. Retail programmes take single shirts in branded bags, while wholesale cartons are packed flat and sorted by size for fast warehouse handling.
Shipping and Worldwide Delivery
Finished cartons move by sea through Chattogram to the main ports of our buyer markets, with air freight available where a programme date cannot move. The export file, fibre content declaration and labelling papers are prepared by our office, and this style can travel with your other colours under one document set.
How Ordering Works
Artwork, a tech pack or a reference garment are all good starting points. Send yours through the quote page and we will reply with the blend options for this style and a per-piece price at your quantity. Before you commit, read the MOQ and production page for quantities and terms and the payment terms page for the payment schedule. Bulk production is scheduled against your approved printed sample, never before it.
Why Brands Source T-Shirts From Bangladesh
Bangladesh keeps the full knit chain inside one border, from spinning and knitting to dyeing, printing and sewing, which is why a placement-sensitive design can be controlled end to end by one supplier. Sports and leisure labels in Spain and Italy programme diagonal graphics on blend bases for their spring ranges, and Chilean retail buyers reorder the same construction for staff and fan programmes.
- Full local chain, from yarn and knitting to the finished garment
- Placement printing controlled under one roof
- Export paperwork and labelling handled as routine
Care and Wash Performance
The blend is chosen for the laundry as much as the rail: it dries faster than pure cotton, resists the twist that would tilt the stripes, and keeps the grey even across repeat washes. The cloth is washed before cutting, so the size bought is the size that returns from the wash, and the printed stripes are cured to flex with the panel rather than crack across it.
Frequently Asked Questions
Will the diagonal stripes stay at the same angle on every size?
Yes. The stripe positions are drawn on the pattern and graded with it, so the angle is a pattern dimension rather than a print-table judgement. The printed sample is checked size by size, and production spot-checks hold the same angle through the run.
Why a cotton-polyester blend for this design?
The blend keeps the front panel dimensionally stable, which protects a diagonal design from tilting after washing, and its smoother face takes a cleaner stripe edge. It still feels like a cotton shirt in the hand, which is why buyers choose it for printed programmes.
Can the stripes run in the opposite direction?
Yes. The artwork can be mirrored so the stripes climb the other way, or recoloured to your palette, at the strike-off stage. The sample is printed in the final direction and colours for your approval before any bulk printing starts.
Can we add a small logo without clashing with the stripes?
Yes. A small embroidered or printed mark usually sits on the upper chest or the sleeve, clear of the stripe run. Send the logo position with your artwork and the sample will show the combined layout at real size before production.