Long Sleeve T-Shirts Made in Bangladesh for USA Brands and Uniform Buyers
Operating as a long sleeve t-shirts manufacturer, Siatex Bangladesh sews this plain cuffed style to order for buyers in the USA, with steady supply also going to the UK, Germany, Canada and Australia. Workwear suppliers, uniform programmes and casual brands use it as a clean base layer style.
Uniform buyers in Mexico often take this same pattern in company colours, keeping one standard shirt across several sites and job roles. Casual labels in Italy favour the soft sage shade for relaxed ranges, pairing the plain body with their own woven neck branding.
The garment shown is a sage green long sleeve t-shirt with a crew neck finished by a ribbed neck band. Sleeves run to full length and end in ribbed cuffs, the hem is straight, and the colour is plain throughout with no print anywhere on the body.
As a supplier, wholesaler and exporter working from Bangladesh, we treat the buyer size chart as the starting point for every order. Sleeve length, cuff width and body shape are settled on a sample first, then held to that sample through sewing and packing.
Key choices available on this style:
- Crew neck finished with a ribbed neck band
- Full length sleeves with neat ribbed cuffs
- Straight hem stitched level front and back
- Ribbing matched to the body colour as standard
- Optional chest pocket added as a buyer option
- Optional side vents added as a buyer option
- Tall sizes and longer body length available
- Buyer labels and tags fitted before packing
This style is made to order in Bangladesh only, and no ready stock is carried for it. Each order is cut from cloth chosen for that brief, so the shade, sleeve length and size range all follow one approved specification from start to finish.
Cut and Construction
The pattern is cut with a regular body that leaves room through the chest and waist without looking loose. Front and back are shaped as separate pieces, the shoulders sit at a natural angle, and the long sleeves are set in with a smooth armhole join.
Sleeve length is graded size by size from the shoulder point to the cuff edge, so smaller and larger sizes keep sensible proportions. The body hem is straight across, giving the shirt a tidy finish when it is worn untucked or layered.
Neck, Cuffs and Hem Finishing
The neck band is cut from rib knitting, joined at the back and stitched evenly around the crew opening so it sits flat. Cuffs are attached as folded rib bands, and the hem is coverstitched so the bottom edge stays level after pressing.
- Ribbed neck band stitched evenly all round
- Full length sleeves set in with care
- Ribbed cuffs attached and pressed flat
- Straight hem finished with coverstitching
- Shoulder seams taped for a tidy inside
Share a measurement chart, a block pattern or a shirt from your current range, whichever you have. We draft the pattern from that reference, grade the full size set and sew a sample in the main size for your fitting comments.
Fabrics and Knit Choices
Most buyers choose a cotton single jersey for this style, giving the body a smooth face and a neat drape. Cotton and polyester blended jerseys are also available where a buyer prefers a blended cloth, with the mix agreed and recorded at sampling.
Cloth weight is a sampling decision, not a fixed house standard. A lighter jersey suits shirts worn under other garments, while a firmer jersey holds a more structured shape for shirts sold as the main outer layer in a range.
Cuff Rib and Sleeve Construction
Cuffs and the neck band are cut from rib knit, a cloth with fine vertical ribs that stretches across its width and returns to shape. The rib is usually knitted to match the body cloth in fibre and shade, so the finished shirt reads as one colour.
Each sleeve is sewn as a tube from shoulder to wrist, then the folded cuff is attached at the opening and stitched round. Cuff depth follows your specification, and a sample shows the finished wrist width before bulk sewing begins.
Colour and Style Variations
Sage green gives this plain style a soft, current look that sits well in casual and uniform ranges alike. The same pattern can be dyed to your own colour references, from pale neutrals for layered ranges to stronger shades for team and company wear.
Cuffs and the neck band are normally matched to the body shade, as shown here. A contrast cuff or neck band can be requested instead, giving a simple two colour detail on an otherwise plain shirt, confirmed on the sewn sample.
Beyond colour, buyers may add a small chest pocket or short side vents at the hem as options on this pattern. Both are treated as buyer options only, drawn onto the pattern at sampling rather than added as standard features.
OEM and Private Label Supply
Private label work forms a large share of our long sleeve orders. Brands and uniform suppliers receive plain shirts carrying their own branding, folded and packed to their instruction, ready for their warehouse, their stores or their contract customers.
Your artwork, label wording and packing notes stay tied to your order alone. The sewing floor fits the label set on your sheet, and the packing team works from that same sheet, so branding cannot drift between making and boxing.
- Woven or printed label at the back neck
- Size and care wording placed inside the shirt
- Hang tags attached following your instructions
- Optional small woven tab at the hem
- Individual bagging or plain folded packing
- Carton marks printed to your own wording
Checking, Packing and Shipping to the USA
Inspection is built into each stage of making. Cloth is checked before cutting, sleeve and cuff joins are reviewed during sewing, and finished shirts are measured, pressed and looked over one by one before they reach the folding table.
Finished work is compared with the approved sample, the size chart and the packing instruction as one combined check. A shirt is packed only when garment, labels and presentation all match those references, with nothing left to guesswork at the end.
- Chest, body length and sleeve length measured
- Neck band shape and stitching checked closely
- Cuff width matched on the left and right
- Seams, hems and trimming inspected throughout
- Shade compared beside the approved sample
- Labels, folding and carton contents confirmed
Shirts are folded with the sleeves laid neatly along the body, keeping the cuffs flat inside the carton. Cartons leave Bangladesh for the USA by the route named on your order, with export documents prepared against the final packed list.
Step by Step Ordering
From Your Brief to a Sewn Sample
Begin with your size chart, preferred cloth, colour references and notes on cuff depth and body length. We sew a sample in the main size that shows the neck band, the ribbed cuffs and the straight hem exactly as they will be made.
Your fitting comments are noted and the pattern is adjusted where you ask, whether that means a longer sleeve, a wider cuff or a change to the body shape. Agreeing these points on a sample keeps bulk production straightforward.
Price Confirmation and Production
Once the sample is approved, pricing is calculated from the final cloth, rib quality, label set and packing method, then confirmed in writing with the specification. The price you accept covers the details recorded on that approved specification.
Production runs in a set sequence: cloth check, cutting, sleeve making, assembly, cuff and hem finishing, measuring, pressing and packing. Progress follows the approved sample at every stage until the cartons are sealed.
Request a Sample in Sage Green or Your Own Colour
A sewn sample tells you more than any photograph can. Send your sizes, colours and cuff preference, and we will make one shirt that shows the neck band, sleeve finish and hem exactly as your buyers would receive them.
Behind this range sits a Canadian company run by a Bangladeshi-born Canadian, with making organised in Bangladesh and orders handled personally from brief to carton. That close attention keeps each order simple to place and easy to repeat.
Frequently Asked Questions
What is the difference between a ribbed cuff and a plain hemmed sleeve?
A ribbed cuff is a separate band of rib knit attached at the wrist, giving a defined, gathered looking finish that holds the sleeve opening in place. A plain hemmed sleeve simply turns the sleeve cloth back and stitches it, giving a looser, simpler edge.
Can this style be made in longer body lengths and tall sizes?
Yes, extra body length can be added on the pattern and graded through the size range, including tall sizes with longer sleeves to match. Tell us the added length you need, and the sample will show the longer fit before bulk cutting.
How should we choose sizes for shirts worn under uniforms and workwear?
Look at the chest measurement and the room you want over the garment worn beneath, then size from your chart rather than guessing. A sample in the middle size, tried under the actual uniform, confirms the fit before the full range is graded.
Can short sleeve and long sleeve versions be combined in one order?
Yes, both versions can be ordered together from the same body pattern, cloth and colour, with the sleeve length as the only pattern change. Each version is sampled and listed separately on the order sheet, so checking and packing stay clear.