Long Sleeve T-Shirts Produced in Bangladesh for Australian Labels and Uniform Suppliers
Siatex Bangladesh makes this plain cuffed long sleeve pattern to order for buyers in Australia, alongside regular shipments to the USA, the UK, Germany and Canada. Clothing labels, teamwear sellers and uniform providers all build ranges around it.
Event merchandise buyers in Japan often order this pattern in soft shades for staff clothing at exhibitions. Workwear resellers in Spain choose it as a plain under layer garment for trade customers across their branch network.
The shirt photographed is a dusty rose long sleeve t-shirt with a simple crew neckline. Its neck is finished with a ribbed band, the sleeves run the full arm length into ribbed cuffs, and the body ends in a straight hem.
Acting as a manufacturer, supplier, wholesaler and exporter, we start each order from the buyer own measurements. Body fit, sleeve length and cuff width are proved on a sample garment before bulk production is allowed to begin.
Choices built into this style:
- Simple crew neckline edged with ribbed banding
- Long sleeves reaching down to the wrist bone
- Ribbed cuffs closing both sleeve ends neatly
- Straight cut hem finishing level all round
- Rib sections colour matched to the body cloth
- Chest pocket available as a chosen addition
- Short hem vents available when specified early
- Buyer labels and tags attached before boxing
This pattern is sewn only against confirmed orders, and no finished stock is held back for general sale. Because cutting waits for your brief, the colour, sizes and sleeve details stay faithful to one agreed specification throughout.
Fit, Cutting and Assembly
The block is cut with a regular body shape that gives easy chest room without a baggy waist. Back and front are shaped as separate panels, the shoulders follow a natural line, and the sleeves join the body through a neat armhole seam.
Across the sizes, sleeve length is graded step by step from shoulder to cuff so proportions hold from the smallest to the largest garment. The hem is cut straight across, which keeps the shirt looking tidy worn either way.
Neck Band, Cuff and Hem Details
A rib knit band forms the neck finish, joined at the back of the neck and stitched evenly around the crew opening. Cuffs are folded rib bands sewn onto the sleeve ends, while the hem is coverstitched to keep its edge flat and level.
- Ribbed neck band applied evenly around the opening
- Long sleeves set in with a smooth armhole join
- Ribbed cuffs sewn on and pressed into place
- Straight hem closed with neat coverstitching
- Inside shoulder seams taped for a tidy interior
Give us a measurement table, an existing pattern or simply a shirt you already sell. From that starting point the pattern is drafted, the range of sizes is graded and a sample in the main size is sewn for your comments.
Jersey Fabrics and Knit Selection
A cotton single jersey is the usual fabric choice here, bringing a smooth surface and a clean drape to the finished shirt. Where buyers prefer a blend, cotton and polyester jerseys are sewn as well, with the exact mix recorded during sampling.
Cloth weight belongs to the buyer decision, not to a fixed house rule. Lighter jerseys suit shirts meant to sit beneath other layers, while a weightier cloth gives the firmer body wanted for a shirt worn on its own.
Rib Knit and Sleeve Construction
Neck banding and cuffs are cut from rib knit, a fabric whose fine ribs run lengthwise, stretch across the width and recover after stretching. The rib generally matches the body in fibre and shade so the garment presents as a single colour.
Sleeves are made as tubes sewn from the shoulder seam to the wrist, then each folded cuff is attached and stitched around the opening. Cuff depth follows the specification, and the sample demonstrates the finished wrist measurement clearly.
Shade Range and Style Extras
Dusty rose gives this plain shirt a soft muted character that suits lifestyle ranges and gentle company colour schemes. The identical block takes buyer colour references of almost any kind, from quiet neutrals to bold shades for team clothing.
As standard, band and cuffs follow the body shade, just as the photograph shows. A contrasting band or cuff remains possible on request, settled on the sample so the finished colour balance is approved in advance.
Buyers sometimes request a small chest pocket or modest side vents at the hem on this block. These stay optional extras, marked on the pattern at sampling stage rather than built into every shirt as standard.
Private Label and OEM Supply
Much of our long sleeve work is private label production. Brands receive plain garments carrying only their own branding, folded and cartoned to their written instruction, ready for their stores, warehouses or workplace contracts.
Your files, wording and packing directions remain attached to your order alone. Sewing staff fit the label set named on your instruction sheet, and packing staff work from the same sheet, preventing any mix up between orders.
- Printed or woven label placed at the back neck
- Care and size wording positioned inside the shirt
- Swing tags fixed following your directions exactly
- Optional woven tab at the lower hem edge
- Individual polybag packing or simple folded packing
- Outer carton printing taken from your wording
Quality Checks, Packing and Shipping to Australia
Inspection sits inside every production stage rather than at the end alone. Fabric is reviewed before cutting, joins at the cuff and sleeve are watched during sewing, and finished shirts are measured and pressed before folding.
Before packing, each garment is compared with the approved sample, the size chart and the packing instruction as one set of references. Only shirts matching all three on garment, labels and presentation are allowed into cartons.
- Chest width, body length and sleeve length measured
- Neck band outline and stitching reviewed carefully
- Cuff widths checked as a matching left right pair
- Seams, hems and thread ends inspected throughout
- Colour compared directly beside the sample garment
- Labels, folding style and carton contents verified
For folding, sleeves are laid neatly along the body so the cuffs rest flat, keeping cartons tidy on arrival. Boxes leave Bangladesh for Australia by the route on your order, and export documents follow the final packed list.
How Ordering Works
Your Brief Becomes a Sewn Sample
Open with your size chart, cloth choice, colour references and any notes on cuff depth or extra body length. We sew a single garment in the main size that displays the neck band, the ribbed cuffs and the straight hem faithfully.
Your comments on that sample are recorded, and the pattern is corrected wherever you point, whether the change concerns sleeve length, cuff width or the body shape. Agreeing the details early keeps the bulk run free of surprises.
Price Agreement and the Making Run
With the sample approved, pricing is calculated from the final fabric, rib quality, label set and packing method, then confirmed in writing together with the full specification. The accepted price covers those recorded details only.
The making sequence never changes: fabric review, cutting, sleeve sewing, assembly, cuff and hem work, measuring, pressing and packing. Every stage is measured against the approved sample until cartons are sealed and ready.
Order a Sample in Dusty Rose or Your Own Shade
A physical sample answers questions that photographs cannot. Send your sizes, colours and cuff preference, and one shirt will be made showing the neck finish, the sleeve ends and the hem exactly as your buyers receive them.
Behind this range stands a Canadian company run by a Bangladeshi-born Canadian, with making organised in Bangladesh and orders handled personally from brief to carton. Buyers find that this close handling keeps each order simple and repeats effortless.
Frequently Asked Questions
Which fabric weights can this long sleeve pattern be sewn in?
The pattern accepts a range of single jersey weights, from lighter cloth for shirts worn under other garments to firmer cloth for shirts worn alone. Weight is chosen at sampling, and the sample garment shows the drape before bulk cutting.
Can we order this pattern with our own woven neck label?
Yes, your woven or printed label is fitted at the back neck during sewing, together with your size and care wording inside the garment. Send the label artwork and placement notes with your brief, and the sample carries them.
Is a chest pocket available on this crew neck style?
A small chest pocket can be added as an optional extra on this block. It is drawn onto the pattern at sampling, positioned to your measurement, and shown on the sample so its size and placement are approved first.
How do you keep the colour consistent across a full order?
Body cloth and rib are dyed to the same approved shade reference, and finished shirts are compared beside the sample garment during inspection. Any piece drifting from the reference is held back rather than packed into the cartons.